- ページ 18

プロ用ビデオアクセサリー Datavideo TP-150のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Datavideo TP-150 20 ページ。 Teleprompter system dedicated to ptz cameras

Q: My Bluetooth remote does not seem to be charging and the LED does not light at all when

connected to my computer. Is there something I am doing wrong?

The LED light on the remote should flash red whilst charging with a computer. Ensure the computer is

switched on during the charging process. Check the supplied USB cable for damage. If the cable is

damaged try a different USB cable. Connect the USB charging cable to a different USB port on the

computer, or try with a different computer. Still not flashing? The remote may need to be switched on

first. Press the green play button on the remote whilst it is still connected to the computer USB port.

Still not working? The charge in the battery may be very low or empty. Leave the remote connected to

the computer and try switching it on again after 15 minutes. Try the above steps twice before

contacting your supplier. Do not open the remote or attempt to replace the rechargeable battery as

you will invalidate the remote's warranty.

Q: My Bluetooth remote does not pair with my cell phone or tablet. Is there something I am

doing wrong?

Is the remote fully charged? If yes, try resetting the Bluetooth remote next. Then try pairing the device

and remote again. Still not working? Clear, or delete, any items already in the tablet or cell phone's

Bluetooth list. On Apple iOS devices there is an arrow right icon next to each Bluetooth item

previously connected. Tap on the arrow then use the remove or forget option. Android devices act in

almost the same way with a settings icon instead. On Android devices the option may be unpair or

delete. Once all previous Bluetooth items have been removed from the list then try pairing the device

with the Bluetooth remote again. Try the above steps before contacting your supplier.

Q: My remote has paired with my tablet device over Bluetooth but I still have no control when

using the DV Prompter App. Is there something I am doing wrong?

Check you are using the latest version of the DV Prompter App. If in doubt delete the App from the

device, then download it again from the App store or Google Play. The DV Prompter App Settings

are important too. The Remote setting should be changed to Bluetooth before attempting to

control the script scrolling etc. Try the above steps before contacting your supplier.

Q: I recently updated to iOS 7 and now my remote no longer works. Is there anything I can do?

After updating your Apple Device to iOS 7 you may be asked a question about permission for the App

to use the mic / headset connector and Bluetooth connections. Please allow these permissions

otherwise the remote may not work. If the wrong option was chosen then these features can be

turned back on.

Q: My Bluetooth remote has been used for a while now. How will I know when it needs to be

recharged?

The DV Prompter app will display RECHARGE BATTERY in the

bottom right hand corner of the application window when the battery

in the Bluetooth remote is running low. When fully charged the remote

will last for approximately 6 hours depending on use.

Frequently Asked Questions

1. Go to Settings > Privacy > Microphone

2. Activate DV Prompter (so that the slider is green)

3. Restart DV Prompter App