- ページ 7

コントローラー 4qd PRO-160 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。4qd PRO-160 Series 16 ページ。
4qd PRO-160 Series にも：取扱説明書 (16 ページ)

10. Display

The Pro-160 has a 2 line display to display useful information during operation

and programming. A display adaptor board is available that allows the display

and / or keypad to be mounted remotely from the Pro-160.

During operation the display will show information in this format

Volts = battery voltage.

Duty cycle = % of battery voltage being applied to the motor [- = reverse].

Motor current in amps.

Profile = profile currently selected [suffix R indicates reverse].

Temp = temperature in 'C. Prefix c denotes controller temp, b denotes battery

temp, m denotes motor temp.*b and m only displayed if additional thermistors are

fitted.

Battery current in amps. Please note the difference between this and motor

current.

The display will also show any alert or fault information.

The Pro-160 has 15 profiles, 14 of which can be edited to suit the user. Each

profile has a number of settings which control various aspects of the controller's

behavior. We have configured the first 9 profiles with values that are a good

starting point for the most popular applications, full details are in the table at the

end of the manual.

It is not possible to make changes to profile 01, to save changes you must first

select another profile.

To edit the settings the SEL button should be held down while turning on the

ignition, you can then navigate through the options and settings as shown in the

menu structure below. Remember to use the menu option to save changes.

PRO-160 V2.0 10/19

Page 7