ページを印刷するInput connector
Gain adjust
Acceleration (below)
Deceleration (top)
(on daughter board)
Speed pot input is via a 4 pin connector, supplied.
Power & Motor connections are by means of 6.35 blade connectors, as shown.
Supply voltage
Supply current
Output voltage
Output current max (typ).
1 minute rating
2 minute rating
continuous
voltage drop at 20a
Overheat current
Overheat temperature
Switching frequency
Acceleration time
Deceleration time
Input
Pot fault detect
Size
case
base
Weight board version
enclosed version
Uni Instructions
Internal Features
Trickle resistor
Relay resistor
batty
A
B
top
C
wiper
Pot
D
min
A
B
Heatsink/mounting block
Specifications - Uni-8
12v or 24v or 36v or 48v
30mA
0 to 100%
115 amps
85 amps
45 amps
30 amps or more:
130mV
25 amps
95°C
20kHz approximately
330mSec to 7 Sec
330mSec to 7 Sec
4k7 to 25k pot or 0-3.5v
3.5v on pot wiper (gain at max) for full speed
greater than 130% Full Speed
71mm x 71mm x 35mm
75mm x 75mm x 40mm
80mm x 100mm x 4mm
110 gm
210 gm
Reverse polarity protection relay
depends on model.
at zero speed
full speed, adjustable
(100 amps regen)
without additional heatsink!
without additional heatsink!
heatsink dependant
typical
on heatsink
(adjustable)
(adjustable)
(adjustable)
approx (if activated)
plus tags
plus tags
Battery +
Motor +
Motor -
Battery -
Page 3