- ページ 7

ホブ CooKing SVIF-CK3.0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CooKing SVIF-CK3.0 18 ページ。 Induction cooker
CooKing SVIF-CK3.0 にも：取扱説明書 (13 ページ), テクニカル・マニュアル (11 ページ), テクニカル・マニュアル (10 ページ)

ページを印刷する

Press on/off key to activate induction cooker. The buzzer will sound once and

the cooking zone indicate circle will show in the LCD display screen of remote

control, the stove will turn into the standby mode. Then press any cooking zone

key to start cooking. The relative cooking zone symbol indicates circle will on. If

there is no cooking utensil or cooking pot material is not suitable on the cooking

zone, the LCD screen will alternately display "E1" and cooker will turn off

automatically after 60s. the cooker will start to heat automatically if put suitable

cooking pot within one minute.

2. Timer mode: The "Timer" key can work for "Power level" functions. The

timer can be set after function selection. Press the timer+ or -key once and

LCD screen will display the "0:00", hour position will be flashing. Press"+" or "-

" to increase or decrease the time setting by +1 minute step up to 2 hours or

down to 0 minute. After the timer is set, the LCD display will start to count

down and turn off the cooker when count down finished, if the time setting is

0, timer function will turn off.

Remark: keep press "+" or "-" key for 3s can increase or decrease the time by

10 minute till to 2h.

3.Lock mode: The "lock" key can work for "Power level" functions and timer

function. Press "Lock" key to active the lock function when the cooker in

working state, the lock symbol "L" will show in the LCD screen. The other

function cannot be used at this time except for "on/off" key and lock key.

Press "Lock" key for 3 seconds again to cancel the lock function.

3.Sleep mode: the remote control will into sleep mode under power off mode

and lock mode. User need press lock key or on/off key to wake up remote

control and then other function can be operation during sleep mode(exception

for timer function)

Cooking zone off: turn the cooking zone off by pressing the relative cooking

zone circle.

4. High temperature indication function

When the panel is overheated, the third digital tube on the LCD screen will

display "H", three modes are as follows:

A. During the heating process, when the panel reaches the set temperature, the

LCD will display "H" and flash all the time, then stop heating and the LCD will

display the power level digit.(such as 1,2,3,4,5,6 )