- ページ 9
リフティングシステム Austlift 915220のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Austlift 915220 12 ページ。 Retractable fall arrester
ページを印刷するINSTRUCTION FOR MAINTENANCE
AS/NZS 1891.3:2020
BMP No. 739186
1. To be used by person weighing upto than 140 kgs.
2. Once the wire rope has been reeled out, do not
leave it suddenly to retract inside on its own, let it
go inside gradually by guiding it slowly inside.
3. Use between temperature range of -30°C to + 50°C.
4. Ensure that the max angle between the vertical &
the lanyard is 40°.
5. Keep away from sunlight or heavy rains when not
in use.
6. Do not attempt repair unless trained by the
manufacturer.
7. Ensure that the anchorage point has strength of
min 12kN as per EN 795, or min 15kN single anchor
point as per AS/NZS 5532 standard.
8. Connect the lanyard to the suitable fall arrest
anchor point.
9. Can be used for horizontal applications.
10. Units marked with this symbol can be used where
a user may fall over the edge of the work surface,
the unit in this application is limited to 100kg user.
11. Ensure that wire rope has no cuts or abrasion
marks before use.
12. Do not use a unit laying flat on its side in a horizontal
application, this may impede the way the wire or
webbing coils back into the unit, preventing the
unit from functioning correctly, special brackets are
available for use in this application.
1
2
140kg Max
5
6
9
10
r>0.5mm
The Retractable Fall Arrester is
marked with:
(i) Identification of the manufacturer
(ii) Standards that the product
complies with
(iii) BMP certification number
(iv) Product Ref. No.
(v) Wire Rope Length
(vi) Unique Serial Number (USN) :
XXXXXXXXXX
(vii) Month & Year of Manufacture
915207
3
4
50C
o
122F
o
o
40 max
-30C
o
-22F
o
7
8
Min 12kN
EN 795
11
12
9