- ページ 5

ジャックス DATONG T050106のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DATONG T050106 17 ページ。 Trolley jack

Jacking a vehicle

1. Park the vehicle in gear and put the handbrake on. Vehicles with automatic gear

boxes should be put into P (Park) and the handbrake put on.

2. Close the release valve by twisting

the handle clockwise as far as it will go.

3. Place the jack under the vehicle so that

the saddle of the jack is centred under

one of the vehicle's lift points (consult

the vehicle's handbook for guidance).

6. Pump the handle until the vehicle is raised to a height which enables one or more

axle stands to be positioned under suitable strong points on the vehicle (consult

the vehicle's handbook for guidance). Two people might be needed to pump up

the jack if it is fully laden to its maximum load.

7. Carefully open the the release valve and lower the vehicle onto the axle stands by

slowly twisting the handle anticlockwise.

Care and maintenance

•

Clean the jack using a lightly moistened cloth. Only use mild cleaning agents,

never solvents or corrosive chemicals.

•

When storing the jack, always make sure that the jack lifting arm and saddle are

fully lowered.

Disposal

This product should be disposed of in accordance with local regulations.

If you are unsure how to proceed, contact your local authority.

Max load

2 tonnes

Min/max height

135/335 mm

Length

450 mm

8.5 kg

Weight

4. Insert the handle into the handle

socket and twist it to lock it in place.

5. Pump the handle up and down

until the saddle makes contact with

the lift point. Check to make sure

that the saddle is centred correctly

before continuing.