- ページ 9

換気フード Cookology ANG605SSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cookology ANG605SS 18 ページ。

3.Attach the expansion pipe onto the one-way-valve as shown below, and

fix the pipe on the valve by cable tie.

4. Drill 3 holes to accommodate the wall bracket. Screw and tighten the

wall bracket onto the wall with the screws (4mm x 40 mm) and wall

plugs provided.

Wall plug

Wall bracket

5．Hang the appliance onto the wall bracket. Also, fix the cooker hood

on the wall by two 4x 30mm screws and wall plugs through the back of

the cooker hood.

7. Put the inside chimney on the outside chimney. Install inside chimney

bracket on the chimney by two screws (4 mm x 8mm). Drill holes on the

wall to accommodate inside chimney bracket.

NOTE: Remember not to fix the screws (4 mm x 8mm ) too tightly; 1mm

loose is recommended, so that later height adjustment can be done more

easily.

Screw

(4mm x 40mm)