- ページ 2
家庭用電化製品 AUSTRAL CLOTHES HOISTS RetractAway 40のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AUSTRAL CLOTHES HOISTS RetractAway 40 5 ページ。
ページを印刷するCORD HEIGHT
Due to distance that
RetractAway can cover
and weight of wet
clothing, lines may sag
in middle. To allow for
this sag, RetractAway
cabinet & Catch should
be mounted so that
cord is at least 100mm
above user's head
height. For long spans,
particularly
RetractAway 50,
consider increasing this
height. See Figure 3.
INSTALLATION STEPS
Wall to Wall
Parts required: 1x RetractAway Cabinet & 4x wall fixings
Follow Steps For:
Wall to Post
Parts required: 1x RetractAway Cabinet, 1x Post, 1x Socket & 2x wall fixings
Follow Steps For:
Post to Wall
Parts required: 1x RetractAway Cabinet, 1x Post, 1x Mounting Bar & 2x wall fixings
Follow Steps For:
Post to Post
Note: Maximum recommended extension for Post to Post is 6.5m
Parts required: 1x RetractAway Cabinet, 2x Posts, 1x Mounting Bar & 1x Socket
Follow Steps For:
Post
Mount RetractAway to wall
Position RetractaAway Cabinet on wall so that mounting slots on either
side are approximately 100mm above the users head height. Ensure
Cabinet is level. Mark wall through both slots. Drill a hole on each mark
to suit the fasteners. Fix RetractAway Cabinet to wall ensuring washers
supplied with Cabinet are between the heads of the fasteners and the
slots. See Figure 4.
- Mount RetractAway to wall
- Mount Receiving Catch to wall
- LINE TENSIONING
- Mount RetractAway to wall
- Mount Receiving Catch to Post
- POST INSTALL (into soil OR with Ground Socket)
- LINE TENSIONING
- Mount Cabinet to Post
- POST INSTALL (into soil OR with Ground Socket)
- Mount Receiving Catch to wall
- LINE TENSIONING
- Mount Cabinet to Post
- Mount Receiving Catch to
- POST INSTALL (into soil OR
with Ground Socket)
- LINE TENSIONING
2/4