- ページ 8
ホブ Cookology TCH601のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cookology TCH601 16 ページ。 60cm ceramic hob black
ページを印刷するReplacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an
appropriate replacement.
The mains supply cable should be replaced in accordance with the
following instructions:
Switch the appliance off at the
control switch.
Open the terminal block on the
underside of the hob.
Unscrew the terminal screws
fixing the cable.
The "green-yellow" earth wire
must be connected to the terminal
marked
mm longer than the live and neutral wires.
The "blue" neutral wire must be connected to the terminal marked
with letter (N) - the live wire must be connected to the terminal
marked with letter (L).
Description of the Ceramic hob surface layout
3.
4 zone ceramic hob schematic diagram
Surface layout table
Furnace
Model
plate 1
power（
kW）
AHW-
1.2
4D-60-1
Note：1.2 kW hyperspeed zones (diameter 165 mm)；1.8 kW
hyperspeed zones (diameter 200 mm).
. It must be about 10
Furnace
plate 2
power（
kW）
1.8
8
Furnace
Furnace
plate 3
plate 4
power（
power（
kW）
kW）
1.2
Total
power
（kW）
1.8
6.0