- ページ 11
ラジオ 4RF Aprisa SR+のPDF マニュアルをオンラインで閲覧またはダウンロードできます。4RF Aprisa SR+ 12 ページ。 Demo kit
4RF Aprisa SR+ にも： クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)
ページを印刷する
5.
Default Configurations
The Aprisa SR+ Demo Kit has been preconfigured to specific parameters in keeping with the
demonstrations outlined in this document.
Should at any stage parameters be changed and a reset to the original state is required, the following
procedures may be used.
Aprisa SR+ Radios
The demo kit radios have been preset with User Defaults. The radio settings can be reset to these
defaults if required.
1. On SuperVisor, click on Maintenance > Defaults > Restore User Defaults. When activated, all radio
parameters will be set to User Defaults.
The configurations set have been detailed below:
Channel Access
Access mode:
Default/Serial/Ethernet
Packet Time-to-live (ms):
Default/Serial/Ethernet
Packet back off (ms):
Security
ICMP:
Serial Port Settings
Baud rate:
Data Bits:
Parity:
Stop Bits:
Flow Control:
Ethernet Settings
Ethernet Port 1:
Ethernet Port 2:
Ethernet Bridge OTA:
access request
0
4 or 2
enabled
115200
8
n
1
RTS/CTS
User+ Management
User+ Management
Enabled
Aprisa SR+ Demo Kit Guide 1.3.0
Default Configurations | 11