- ページ 2

ミキサー AUSTRALIAN MONITOR TX8000のPDF パンフレットをオンラインで閲覧またはダウンロードできます。AUSTRALIAN MONITOR TX8000 2 ページ。 8 channel mic/line mixer
AUSTRALIAN MONITOR TX8000 にも：仕様 (2 ページ), 取扱説明書 (7 ページ)

ページを印刷する

Engineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (

NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233

TAS Tel: (03) 6228 6373 Fax: (03) 6278 1063 SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 Export Enquiries: [email protected]

Frequency Response

Total Harmonic Distortion

Signal To Noise Ratio

Tone Controls

Bass @ 100Hz, Boost +12dB, Cut -12dB; Treble @ 10kHz, Boost +9dB, Cut -9dB

Inputs

8 inputs, 6 of which are dual mic/line. The mic inputs are active balanced with

3 pin XLR female sockets (200-600 Ohms). Maximum Input Level is 300mV.

The line inputs are dual female RCAs (47K Ohms). Maximum Input Level is 10V.

Input Sensitivity

Phantom Power

Outputs

Master Output, 3 pin XLR male socket. (1.5V @ 600 Ohms). Maximum Output

Level: +20dB. Mono Headphone Output, 1/4" socket (3.5V @ 600 Ohms).

Mono Tape Output, dual female RCA connectors. (700mV @ 10K Ohms)

Controls

Recessed Treble and Bass Controls per channel, Master Level Control

Indicators

Power Sources

AC: 240V - 50Hz or 110V - 60Hz (special order), 3 pin IEC connector; DC: 24 Volts

Power Consumption

Dimensions/Weight

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The mixer shall have six dual microphone/line inputs and two dedicated microphone inputs. The micro-

phone inputs shall be active balanced and feature 3 pin female XLR sockets. The line inputs shall fea-

ture dual female RCA sockets. Each channel shall include tamper resistant treble and bass controls. An

internal trim pot shall also be included for all channels.

The equalisation per channel shall provide 12dB cut or boost at 100Hz and 9dB cut or boost at 10kHz.

The master section shall include a master level control and a 7 segment output level LED meter. The

master output shall be a balanced 3 pin XLR male socket. The tape output shall feature dual RCA

female sockets. A 1/4" mono headphone socket shall be included for monitoring. The mixer shall have

facilities for a plug-in dual level muting card, as well as a 4 tone generator card.

The mixer shall be of high quality, suitable for both live and commercial applications. It should have

ample headroom and a frequency response of no less then 40Hz - 15KHz (±3dB). Total Harmonic dis-

tortion shall be no more than 0.05% at 1kHz. The S/N ratio shall be -76dBV or better. Phantom Power

of no less than 18V DC shall be available on all microphone inputs. An internal switch to disable the

phantom power shall also be included. The unit shall be packaged in a metal chassis suitable for desk

or rack mounting.

The mixer shall be an Australian Monitor Installation Series model TX8000.

), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia

ABN 78 001 345 482

-76dBV (all channels at centre position)

The last two inputs are balanced mic only.

Mic: 0.6mV @ 200 Ohms; Line: 50mV @ 47K Ohms

Level Control per channel, Internal Trim Control per channel,

Power "on" LED, 7 segment LED meter

44mm H x 482mm W x 250mm D (Chassis Dimensions Only). 3kg

Website: www.australianmonitor.com.au

40Hz - 15kHz (± 3dB)

Less than 0.05% @ 1kHz

18V DC

7 vA