- ページ 5
アクセサリー AUSTRALIAN MONITOR AMISCL2のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AUSTRALIAN MONITOR AMISCL2 8 ページ。 Pro series stereo compressor limiter
ページを印刷する15
16
17
CHANNEL DETAIL
16
TRS LINE OUT
This 6.35mm TRS connector is a bal-
anced or unbalanced line level output.
17
XLR LINE OUT
This XLR connector is a balanced line
level output.
18
XLR LINE IN
This XLR connector accepts a balanced
line level input.
AMISCL2 INSTALLATION & OPERATION MANUAL
18
19
19
TRS LINE IN
This 6.35mm TRS connector accepts a
balanced or unbalanced line level input.
20
DETECTOR LOOP INSERT
This 6.35mm TRS jack allow for an equalis-
er or other processor to be inserted into the
signal path. Note that the ring of the insert
point is the send and the tip is the receive.
REAR PANEL
15
CHANNEL DETAIL
Refer to inset box below.
21
MAINS VOLTAGE SELECTOR
This switches mains voltage from 230VAC
to 240VAC. Please ensure that this switch
is set to the correct voltage for your part
of the world.
20
22
FUSE HOLDER
Please note that the AC voltage selection
is defined by the position of the fuse holder.
If you intend to change the operating
voltage, remove the fuse holder and twist
180 degrees before re inserting it.
Matching the two markers monitors
the selected voltage.
23
MAINS POWER LEAD
This connects to mains AC power. Please
ensure that the correct voltage is set for
your part of the world. (See 21)
21
22 23
PAGE 5