- ページ 4
ダッシュカメラ 4Sight The Original Dash CamのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。4Sight The Original Dash Cam 9 ページ。 4sk98.1
ページを印刷する
solid blue light, the red light will not be lit up
o (Note: While connected to your computer via the USB cable, do not
press buttons on the camera)
When charging through the car charger, in the 'battery' display icon on the top
-
left of the screen, a charging lightning bolt will appear, indicating the device is
charging.
o (Note: For first charge a minimum of 6 hours is recommended)
B) Connected device to the car charger
After starting the car, the device automatically turns on and enters video mode, and
will begin to record. The device will continue recording while charging. When the car
is turned off, the device keeps working and will turn off five seconds later, saving the
recorded files automatically (if your car's 12V outlet stays active when the car is
turned off, it is recommended to unplug your Dash Cam before leaving your car).
Alternatively you can choose to turn the camera off using the POWER button; the
files will be automatically saved.
2.) Function introduction
This device has three Modes: video, photo and preview
To switch between modes, simply press the MODE button
A)
Video mode: (Memory card must be inserted)
After pressing and holding the power button or connecting to the car charger, the
device turns on and enters video mode automatically. It will automatically begin to
record. To stop recording you can press the REC/SNAP button, or turn off the device
by pressing the POWER button. Both ways the files will be automatically saved to the
memory card.
B)
Photo mode: (Memory card must be inserted)
After the device is powered on, press the MODE button to switch into Photo mode. To
take a picture, simply press the REC/SNAP button. A photo will be taken and stored on
the memory card.
）
C
Preview mode:
After the device is powered on, press the MODE button twice to enter into Preview
mode. You can scroll through previews by pressing the UP and DOWN buttons. The
4