- ページ 5

照明器具 Bresser SH SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bresser SH Series 13 ページ。 Led panel lights with lcd

ページを印刷する

GENERAL WARNINGS

DANGER OF BODILY INJURY!

Do not use in the presence of children or animals. Store out of

reach of children and animals.

DANGER OF AN ELECTRIC SHOCK!

This unit contains electronic parts that are powered by a power

source (AC adapter or batteries). Only use the device as described

in the manual. Otherwise, you run the DANGER of an ELECTRIC

SHOCK.

Never bend, squeeze or pull power cables, connecting cables,

extensions or connectors. Protect cables from sharp edges and

heat.

Check this device, cables and connections for damage before

use. Never attempt to operate a damaged device, or a device

with damaged electrical parts! Damaged parts must be replaced

immediately by an authorised service agent.

Operate the device only in a completely dry environment and do

not touch the device with wet or damp body parts.

RISK OF GLARE!

Make sure that people and animals do not look into the light. The

high luminosity can cause glare to the eyes and afterimages. This

impairment of vision can lead to accidents.

FIRE/EXPLOSION HAZARD!

Never cover the ventilation slots or cooling fins of the device during

operation or until it has cooled down completely!

Keep highly flammable materials away from the device!

Only operate the device with open softboxes to avoid a fire hazard

due to heat accumulation!

Keep children and animals away from the device! They could knock

the device over.

Make sure that no one can trip over connection cables of the

device. The device could be knocked over.

Do not expose this device to high temperatures. Use only the

supplied AC adapter or the recommended batteries. Do not short-

circuit the device or batteries or throw them into a fire! Excessive

heat and improper handling can cause short circuits, fires and even

explosions!

NOTE!

Do not disassemble the device! In the event of a defect, please

contact your dealer. They will contact the Service Centre and can

arrange the return of this device for repair if necessary.

Only use accessories and spare parts for this device that comply

with the technical specifications.

Disconnect the power supply by pulling the mains plug when the

device is not in use, in case of a longer interruption of operation

and before any maintenance and cleaning work.

Place your device so that it can be unplugged at any time. The

power outlet should always be near the device and should be

easily accessible, as the plug of the power cord serves as a part to

disconnect the device from the mains supply.

To disconnect the device from the mains supply, always pull the

plug and never pull the cable!

Do not subject the device to excessive vibrations.

SCOPE OF DELIVERY

LED panel light (A), ball head (B), mains adapter holder (C), mains

adapter with DC connection cable/plug (D), power cable (E),

diffusion filter disc (F), transport bag (G)

PARTS OVERVIEW

(Fig. 2)

1. LED panel

2. Diffusion filter disc

3. Flap flaps

4. Ball head

5. Battery holder for optional battery*

6. LCD for "Colour Temperature"

7. Color Temperature Rotary Control

8. LCD for "Light intensity"

9. Rotary control "Light intensity"

10. DC connection socket

11. On/Off switch

12. Locking screw (ball joint)

13. Spigot connection opening

14. Locking screw (spigot connection)

15. Power contacts

16. Locking lever for battery holder

INSTALLATION & COMMISSIONING

Attach ball head & mount on a tripod

1. Screw the ball head (4) with the threaded screw into the

corresponding internal thread on the LED panel light.

2. Turn the locking screw (14) for the spigot connection so far that

the spigot connection port (13) is exposed.

3. Place the LED panel light with the spigot connection opening of

the ball head on the spigot adapter* of a tripod* or an alternative

lamp holder*.

4. Tighten the locking screw of the spigot connection so that the

LED panel light is securely attached.

Power supply

IMPORTANT!

Never operate the device in parallel with batteries and with an AC

adapter to avoid damage to the electronics. There is a risk of a

short circuit!

Only use the recommended battery type or the supplied AC adapter.

Make sure that the on/off switch (11) is in position '0' before the

power supply is established or disconnected.

Always disconnect the power adapter from the mains first before

disconnecting the cable from the LED panel light.

Power supply via AC adapter

1. Connect the power cable (E) to the AC adapter (D).

2. Plug the DC connector of the AC adapter into the DC connector

(10) on the LED panel light.

3. Insert the Euro plug into the mains power socket.

NOTE!

The AC adapter (D) can be fixed in the AC adapter holder (C) and

thus attached to the battery holder (5).

1. Insert the battery* from the side into the battery holder (5) so

that it reaches into the power contacts (15).

3. To remove the battery, press and hold the locking lever (16) and

pull the battery out of the side of the battery holder.

Switching the unit on/off

1. Move the on/off switch (11) towards 'I' to turn on the LED panel

light.

2. Move the on/off switch towards '0' to turn off the LED panel light.

(Fig. 1)

*not included with the purchase