- ページ 6

コントロールユニット BENDIX E-10 DUAL BRAKE VALVESのPDF マニュアルをオンラインで閲覧またはダウンロードできます。BENDIX E-10 DUAL BRAKE VALVES 8 ページ。 Dual brake valves

4. If the work is being performed on the vehicle's air brake

system, or any auxiliary pressurized air systems, make

certain to drain the air pressure from all reservoirs before

beginning ANY work on the vehicle. If the vehicle is

equipped with an AD-IS

reservoir module, be sure to drain the purge reservoir.

5. Following the vehicle manufacturer's recommended

procedures, deactivate the electrical system in a manner

that safely removes all electrical power from the vehicle.

6. Never exceed manufacturer's recommended pressures.

7. Never connect or disconnect a hose or line containing

pressure; it may whip. Never remove a component or

plug unless you are certain all system pressure has

been depleted.

8. Use only genuine Bendix

components and kits. Replacement hardware, tubing,

hose, fittings, etc. must be of equivalent size, type and

strength as original equipment and be designed

specifically for such applications and systems.

9. Components with stripped threads or damaged parts

should be replaced rather than repaired. Do not attempt

repairs requiring machining or welding unless specifically

stated and approved by the vehicle and component

manufacturer.

10. Prior to returning the vehicle to service, make certain all

components and systems are restored to their proper

operating condition.

11. For vehicles with Antilock Traction Control (ATC), the

ATC function must be disabled (ATC indicator lamp

should be ON) prior to performing any vehicle

maintenance where one or more wheels on a drive axle

are lifted off the ground and moving.5. Following the

vehicle manufacturer's recommended procedures,

deactivate the electrical system in a manner that safely

removes all electrical power from the vehicle.

air dryer system or a dryer

replacement parts,