- ページ 10

エアーコンプレッサー BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOMのPDF サービスデータをオンラインで閲覧またはダウンロードできます。BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM 17 ページ。 Air power compressor
BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM にも：インストレーション・インストラクション (4 ページ)

ページを印刷する

BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM サービスデータ

BACK / RETOUR

RPM., the time required to raise the reservoir(s) pressure

from 85 psi to 100 psi should not exceed 5 seconds. Dur-

ing this test, the compressor should be checked for gasket

leakage and noisy operation, as well as unloader opera-

tion and leakage. If the compressor functions as indicated

reinstall on the vehicle connecting all lines as marked in

the disassembly procedure.

BA-921 SPECIFICATIONS

Typical weight ....................................................... 28 lbs.

Number of cylinders ...................................................... 1

Bore Diameter ....................................... 92mm (3.622 in.)

Stroke ................................................... 54 mm (2.125 in.)

Calculated displacement at 1250 RPM ............. 15.8 CFM

Flow Capacity @ 1800 RPM & 120 PSI ............ 11.8 CFM

Flow Capacity @ 3000 RPM & 120 PSI ............ 18.0 CFM

Maximum recommended RPM ........................ 3000 RPM

Minimum coolant flow maximum RPM ...... 1.3 Gals./Min.

Approximate horsepower required:

Loaded 1800 RPM at 120 PSIG ........................... 4.5 HP

Unloaded 1800 RPM ............................................ 1.3 HP

Maximum inlet air temperature .............................. 250 F°

Maximum discharge air temperature ..................... 400 F°

Minimum oil pressure required at

engine idling speed ............................................... 15 PSI

Minimum oil pressure required at

maximum governed engine speed ......................... 15 PSI

Minimum oil-supply line size ............................. 3/16" I.D.

Minimum unloader-line size ............................... 3/16" I.D.

Minimum Governor Cutout Pressure ....................... 90 PSI

TORQUE SPECIFICATIONS

Assembly Torques in inch pounds (in. Ibs.)

M8x1.25-6g Cylinder Head ................................. 265 - 292

M5x0.75-6g Unloader Cap ..................................... 62 - 71

M8x1.25-6g Governor Adapter ............................ 133 - 142

M8x1.25-6g Rear End Cover ............................... 195 - 213

M6x1.00-6g Crankcase Cover ............................... 62 - 71

M20x2.50-6g Crankshaft Nut ......................... 1858 - 2567

Inlet Port Fittings

7/8"-12 UNF ....................................................... 221 - 248

3/4"-14 NPT .................................................... 2 - 3 TFFT

Discharge Port Fittings

7/8"-12 UNF ....................................................... 221 - 248

3/4"-14 NPT .................................................... 2 - 3 TFFT

Water Port Fittings

3/4"-16 UNF ....................................................... 221 - 248

3/8"-18 NPT .................................................... 2 - 3 TFFT

Unloader Port Fittings

1/8"-27 NPT .................................................... 2 - 3 TFFT

Safety Valve Port

3/4"-16 UNF ....................................................... 221 - 248

1/2"-14 NPT .................................................... 2 - 3 TFFT

Oil Port 7/16"-16 UNF ........................................ 177 - 204

Note: TFFT = Turns From Finger Tight