除湿機 BENDIX AD-1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。BENDIX AD-1 16 ページ。
BENDIX AD-1 にも：サービスデータ (16 ページ)

™

Bendix

AD-1

and AD-2

AD-1

FIGURE 1

The air dryer collects and removes moisture and

contaminants before the air reaches the first reservoir. It is

distinctly different than a reservoir drain valve or aftercooler

in that it provides "dry air" for the air brake system. The

daily draining of the system's reservoirs is no longer

necessary, thus reducing maintenance considerably when

compared to an air brake system without an air dryer.

In a system without an air dryer, the life of air brake

components is substantially reduced because of contact

with water and oil in the system and since the air dryer

removes water and oil in vapor form, life of the component

devices is substantially increased when the air dryer is used.

™

Air Dryers

™

AIR DRYER

AD-2

The air dryer can be used on most highway vehicles where

normal compressor loaded time is 90 seconds or less and

unloaded time is 30 seconds or more. If the compressor

remains loaded for long periods of time, such as on a transit

bus, certain changes in the purge volume of the dryer must

be made. For more information regarding increase of the

purge volume, contact our Engineering Department, in Elyria,

Ohio.

The air dryer is installed in the discharge line between the

compressor and the first reservoir. The unit must be mounted

vertically and mounting brackets are provided and can be

adjusted to meet installation requirements.

™

AIR DRYER