- ページ 6

リモコン Airwell RC08CのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Airwell RC08C 8 ページ。 Room air conditioner remote control

ページを印刷する

OPERATIION

When the room temperature reaches the new set value, the thermostat will cause

the unit to pause. After about 1 hour the temperature will be raised by 1 °C in

cooling, or lowered by 1 °C in heating. This enables you to save energy without

sacrificing your comfort.

COOLING AND DEHUMIDIFYING

Setting temperature

Room temperature

1 hour

TIME

I FEEL/ROOM TE MP FUNCTION OPERATION

Press button I FEEL to activate the I FEEL function. Thermometer sign will appear on

the LCD operation display

.Select suitable temperature setting. Make sure that

the remote control unit is aimed at the air conditioner. Prevent the I FEEL sensor from

being affected by heat sources such as lamps, heaters, direct sun, etc. or from being

directly affected by the air conditioner air flow.These may cause the sensor to transmit

the wrong temperature data, thereby disturbing the performance of the I FEEL function.

Press again on I FEEL button, the measured room temperature sign

displayed .

To cancel the ROOM Temperature display press on one of the following:

- Press again on I FEEL button.

- Change of MODE button.

LOCK FUNCTION

By pressing - and + bottoms simultaneously to lock the last operation program. All the

function buttons will be inoperative, including POWER button. By pressing both buttons

again the remote control will be released from its locked position.

HEATING

Room temperature

1 hour

TIME

will be

SETTING THE TIMER

There are four timers that can be selected on the remote control. Two daily timers (desigated

as T1,T2), and two optional weekend timers(designated as WKT1, WKT2). Each timer can

be selected by pressing TIMER button.

The daily timers T1 and T2 can be set for ON and OFF separately for two different time

periods.

Timer setting will not change until new setting is input.

The weekend timers WKT1 and WKT2 can be set for ON and OFF separately for two

different time periods and they are effective two days only. These timers will be effective on

the day of setting and on the day after only.

At 24:00 on the second day, the WK timer will not be effective anymore and the daily timer

will be effective again.

WKT1 - effective on the setting day.

WKT2 - effiective one day afgter the setting day.

NOTE:

1. During the weekend timer operation, the daily timers will not

be disabled.

2. The WK timers must be reactivated every weekend.

A) HOW TO SET THE ON TIMER

1. Press the TIMER button to select the desired timer.

2. Press the SET button till the ON sign blinks.

3. Press the + or - button until the desired valve is displayed.

4. Press the SET button to activate the timer.

B) HOW TO SET THE OFF TIMER

1. Press the TIMER button to select the desired timer.

2. Press the SET button till the OFF sign blinks.

3. Press the + or - button until the desired valve is displayed.

4. Press the SET button to activate the timer.

OPERATIION

MODE

CLR

TIMER

SET

SLEEP

TURBO

ECO

ION

I FEEL

EYE

CLEAN

LIGHT