- ページ 3

バッテリーチャージャー Bretford CORE 10SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bretford CORE 10S 3 ページ。

USER GUIDE |

CORE™ 10S CABINET

ATTACH TO DESKTOP/COUNTERTOP

1. Using the two internal holes in the bottom front of the

cabinet as guides, (see orange arrows)

holes into the mounting surface.

2. Using appropriate length screws (customer supplied),

with washers if necessary, fasten the screws into the

mounting surface. DO NOT OVER TIGHTEN.

(For mounting to optional carrier, see separate instructions

included with CTUCAR-CK.)

MOUNTING TO WALL

1. Attach the cabinet mounting plate to the wall using suitable

hardware for your chosen mounting surface. The mounting

method must be able to support up to 220 lbs. (100 kg.).

2. Once the mounting plate is securely mounted to the wall,

lift the plate into place and slide the matching plate

located on the rear of the cabinet into the lip of the

wall-mounted plate. (See pictures above.)

3. To prevent the cabinet from being lifted off of the plate,

secure it by inserting the 2 screws provided through the

holes in the back of the cabinet (see picture) and fasten

securely. Once the front door is locked these screws will

be inaccessible, preventing the cabinet from being

removed from the wall.

Part #031-10018

Rev. 01 03.11.14 RCG

drill two pilot

CAUTION

• For added safety and ease of installation, use a

qualified professional to properly install the correct

mounting hardware. Failure to secure the cabinet

• The wall mounting plate is intended to support the

cabinet and ten mobile devices (maximum weight of

• Do not place anything on top of the cabinet.

• Use only the mounting plate provided with

• Bretford will not be liable for the improper use

STORE & CHARGE | CHGCAB10-CK

properly will void the warranty.

devices not to exceed 40 lbs.).

this product.

installation of its products.