- ページ 16

計測機器 Dylos DC1100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dylos DC1100 20 ページ。 Air quality monitor

Troubleshooting Guide

The unit must be turned on by pressing the ON/OFF button prior

to operation.

If the display does not come on after connecting the AC adaptor

and pressing the ON/OFF button then contact us for support.

If the unit fails to start sampling or the MODE, SELECT, or

ON/OFF buttons fail to operate as described in this manual then

If unit fails to count – that is the display consistently reads zero for

both small and large particles then contact us for support.

If counts seem excessively high in a particular location, but in a

nearby location in the same room the counts are much less then

there could be an interference problem. Certain kinds of

fluorescent lighting can cause high counts if located within 1-2

feet of the DC1100. To be safe move the DC1100 several feet

away from any device you suspect might be causing interference.

You can obtain support for this product via our web site by