- ページ 11

産業機器 dymax Tridak 1001のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dymax Tridak 1001 20 ページ。 Syringe filling system

Operation

1. Place pre-packaged, sealed Cartridge upright on a flat, stable working surface (Figure 5).

2. With the Nozzle up, remove the Colored Cap, and quickly insert the Mating Fitting from the

Disposable Fluid Path (Figure 6). Tighten firmly.

3. Ensure the Fluid Path is sealed with a Luer Fitting and Cap before transporting or loading the

Cartridge into the Reservoir Retainer.

NOTE: Low-viscosity fluids may require Teflon® wrap on threads.

Figure 5. Cartridge with Cap Installed

Remove Cap

Tridak® Model 1001 Syringe Filling System User Guide

Figure 6. Cartridge with Fluid Path Installed

Nozzle