- ページ 14
照明器具 dymax ECE ZIP ShutterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dymax ECE ZIP Shutter 20 ページ。 For use with dymax ece flood lamp systems
Dymax ECE ZIP™ Shutter User Guide
14
Troubleshooting
CAUTION:
Only qualified maintenance personnel should attempt the following procedures.
Problem
Possible Cause
The shutter curtain
One of the tension
does not open or
screws is not tight
close smoothly
enough
One of the Limit
The shutter's motor
Switches is not
continuously runs
engaging properly
No power at shutter
The shutter will not
operate
The plug (38317 or
38318) is not installed
in J5 of the reflector
housing
Testing
All functions of the ZIP Shutter
operate properly
All functions of the ZIP Shutter
operate properly
Verify the supply voltage being
delivered to the shutter. Test
the voltage at pins 1 & 2 of the
8-pin connector (24 VDC)
All functions of the ZIP Shutter
operate properly
Corrective Action
Adjust the curtain tension
Adjust the micro-switch activating
blade
Check and replace the wiring if the
light source is operational but the
ZIP Shutter is not. If a problem
occurs within the light source,
consult the user guide
Install the plug as described in the
installation instructions