- ページ 9

照明器具 dymax ECE ZIP ShutterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dymax ECE ZIP Shutter 20 ページ。 For use with dymax ece flood lamp systems

Figure 6. Attach Mounting Plate to

Reflector Housing

4. Install the Lamp Housing Assembly into the ZIP Shutter and attach it with four M4 x 8 screws (Figure 9).

NOTE: One side of the Filler Plate has a third screw hole (Figure 8). When in the correct position, this screw

hole will be at the rear of the Shutter.

Figure 8. Lamp Housing Assembly

Figure 7. Attach Air Plenum to Filler

Plate/Reflector Assembly

Figure 9. ECE 5000 Lamp Housing

Assembly Installed with M4 x 8 Screws

Third Screw Hole

Dymax ECE ZIP™ Shutter User Guide

Four M4 x 8 screws (two located on opposite side)