- ページ 4
コントローラー dymax BlueWave MX-150のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dymax BlueWave MX-150 12 ページ。 Ledd spot-curing emitters
dymax BlueWave MX-150 にも： ユーザーマニュアル (16 ページ)
ページを印刷するClick here for more details on the Dymax BlueWave® MX-150 LED Emitter - 405nm
Unpacking
Upon arrival, inspect all boxes for damage and notify the shipper of box damage
immediately. Open each box and check for equipment damage. If parts are
damaged, notify the shipper and submit a claim for the damaged parts. Contact
Dymax so that new parts can be shipped to you immediately.
WARNING!
controller via the interconnect cable it is susceptible to ESD
damage, handle according to ESD standards using a ground strap
and do not touch exposed connector pins.
The parts below are included in every package/order. If parts are missing from
your order, contact your local Dymax representative or Dymax Customer Support
to resolve the problem.
Parts Included
LED Emitter
•
BlueWave MX-150 LED Emitter Assembly
•
5-mm Lightguide Simulator
•
User Guide
Installation
The BlueWave MX-150 emitter is part of a MX-series curing system and requires
connection to a controller via an interconnect cable for proper operation.
Important Information
•
Do not connect any components while power is applied.
•
Mount the BlueWave MX-150 emitter to a rigid support, such as the
emitter stand PN 42390, prior to connecting the interconnect cable to
prevent handling damage.
•
Do not touch the emitter aperture glass. This can result in poor
performance and broken glass due to heating. Inspect before each use
and clean with isopropyl alcohol if contaminated.
6
Contact the professionals at Fiber Optic Center for a quote or to get more details.
focenter.com
Until the BlueWave® MX-150 emitter is attached to a
• 508-992-6464 | (800) 473-4237 •
23 Centre Street • New Bedford, MA 02740 USA
U S E R G U I D E
|
B L U E W A V E M X - 1 5 0 E M I T T E R S
Product data subject to change
without notice.