- ページ 11

医療機器 dymax 39166のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dymax 39166 16 ページ。 Ax light shield kit

ページを印刷する

Operation

For a detailed description of the BlueWave

curing system operation, maintenance, and

troubleshooting, see the BlueWave

System User Guide. Below is a general, suggested

sequence of activities that can be altered to better match

your working conditions, process requirements, and work

habits.

To begin production curing, place the item to be

cured inside the Light Shield. Close the Door and a

click sound should be heard.

Initiate the cure cycle by pressing the Foot Switch or

Rotary Push Button on the front panel of the

BlueWave

AX-550 Controller. If using the Rotary

Push Button, make sure to first highlight the

Stop/Run Screen Icon (Figure 12)

Once the cure cycle is completed, open the Light

Shield and unload the cured parts.

If the Light Shield's Door is opened at any time, the

"LED INHIBIT OPEN" message will be shown

on the screen and the curing cycle cannot be

started. If the Door is opened during a cycle, the

cycle will be terminated immediately and the "LED

INHIBIT OPEN" message will appear on

the screen.

NOTE: Once a cycle has been terminated due to

door opening, the door must be shut and cycle

restarted; it does not automatically restart upon

shutting the door.

Cleaning & Maintenance

General

For detailed technical assistance, please call the Dymax

Application Engineering.

Light Shield

The light shield is designed to be maintenance free.

Periodic cleaning will ensure long, trouble-free operation.

BlueWave

AX-550 LED Curing System

See the BlueWave

AX-550 LED Curing System User

Guide for maintenance recommendations.

D Y M A X . C O M

AX-550 LED

AX-550 LED Curing

Stop/Run Icon

Rotary Push Button

Figure 12.

Stop/Run Screen Icon Selection

U SE R G U I D E

A X - 5 5 0