- ページ 6
スイッチ Dymec DY-H8080XRのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dymec DY-H8080XR 9 ページ。 Hardened industrial 8 port gigabit flat poe switch, 8 x 10/100/1000 tx 30w pse, 48-56vdc input voltage, operating temp.: -40c to +75
ページを印刷する
DYMEC
Specification
IEEE Standard
Switch Architecture
Data Processing
Flow Control
Jumbo Frame
MAC address Table Size
Packet Buffer Size
Network Connector
Network Cable
Protocol
LED
Reserve polarity
protection
Overload current
protection
Power Supply
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3x Flow Control and Back Pressure,
IEEE 802.3af for POE
IEEE 802.3at for POE+
Back-plane (Switching Fabric): 16Gbps
Store and Forward
IEEE 802.3x Flow Control and Back Pressure
9KB
4K
1Mbits
8 x RJ-45 10/100/1000BaseT(X) auto negotiation,
Auto MDI/MDI-X function, Full/Half duplex
8 x Gigabit POE+ 802.3at/af PSE port, 30W per port
UTP/STP above Cat.5e Cable
EIA/TIA-568 10-ohm (100m)
CSMA/CD
PW1 (Green): ON－Power 1 is detected
PW2 (Green): ON－Power 2 is detected
PW3 (Green): ON－Power 3 is detected for Power DIN
RLY (Amber): ON－Connect only PW1 or PW2
OFF－Both PW1 and PW2 are connected
TX/RJ-45 port:
LNK (Link/Active) (Green): ON－TX port is detected
POE (Amber): ON－PD is detected and PSE is activated
OFF－PD is not detected
Present
Present
Redundant Dual DC 48V-56V Power Input
6
Flashing－TX data is
transmitting/receiving