- ページ 6
リフティングシステム BENE P2のPDF 安全および取扱説明書をオンラインで閲覧またはダウンロードできます。BENE P2 12 ページ。 Monitor lift
ページを印刷するSAFETY INSTRUCTIONS
12. Only professionals authorised by the
manufacturer may do maintenance or
repair any electrical equipment.
13. Do not operate devices in explosive
environments.
14. This table is admitted only for the
commercial office area and management.
15. This appliance must not be used by
any person (including children) with
limited physical, sensorial or mental
abilitiesor failing experience and/or
knowledge unless they are supervised by
a person responsible for their safety or
received instructions about how to use the
appliance.Children should be supervised
in order to make sure that theydo not play
with the appliance.
16. The manufacturer assumes no liability for
damage resulting from improper use.
17. Connection plug boards must be fixed
properly for easy plugging and unplugging.
Plugs and connection plug boards must
be located in such a way that no fluids
come into contact with electrical
equipment when the office furniture is
used properly.
18. The power cable must be secured in
the strain relief of the leg frame
Interconnecting cables may be run loosely.
All lines and cables must be run in such a
manner as to avoid mechanical damage
(i.e., shearing, abrasion...).
19. Desks with flexible or height-adjustable
worktops require special care. Cables
must be sufficiently long to allow height
adjustments without damaging the cables
and wiring (i.e., stretching, crushing, ...).
20. If the power cord of this equipment is
damaged, it must be replaced by the
manufacturer, their customer service, or
a similarly qualified person so as to avoid
any risk.
6