- ページ 6

ラック＆スタンド GABOR CP-6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GABOR CP-6 10 ページ。 Fixed 1.5 npt mounting plate

Mounting to a

Suspended Ceiling

Mount the plate from a suspended ceiling by

using four 3/8-inch Grade 2 or better threaded

rods, which are secured to framing channels

spanning up to 5 feet by Grade 2 or better

3/8-inch channel nuts.

Screw a threaded rod into

each channel nut.

Screw a nut onto each

threaded rod.

Insert washers onto the

threaded rods, and fit the

plate onto the rods.

Rotate the nuts up and down

the threaded rods to adjust

the plate until it's level.

Once the plate is level, fit a

washer and nut onto each of

the four threaded rods, and

tighten the nuts until secure.

4X 4X 8X 8X