- ページ 14
ラベルメーカー Dymo LabelManager 450DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dymo LabelManager 450D 19 ページ。 Dymo labelmanager user's guide
Dymo LabelManager 450D にも： ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ), 概要 (12 ページ), クイックスタート (4 ページ)
ページを印刷する
formats in any of the fields, however, if you
select a location that is filled, the previous label
format will be overwritten.
4. Select a field and press
appears in the field.
5. Enter a name for the format and press
label format is saved and you are returned to the
label.
Recalling Stored Labels and Formats
You can easily recall labels and formats stored in
memory to use at a later time.
To recall labels or formats
1. Press
.
Memory
2. Select Recall and then Label, Format, or Last
Printed.
A list of memory locations is displayed similar to
storing a label or format.
3. Select a label or format to recall and press
Caring for Your Labelmaker
Your labelmaker is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your labelmaker from time to time to keep it
working properly. Clean the cutter blade each time
you replace the label cassette.
To clean the cutter blade
1. Press
to turn off the power.
A
2. Open label cassette compartment and remove
cassette.
3. Press
and then
message, Cut Test, appears on the display.
4. While holding down the
press
. The cutter blade will move into view
in small steps.
14
. The word Name?
. Your
together. The
A
key, repeatedly
Shift
5. When you are able to access both sides of the
blade, release the keys.
6. Use a cotton ball and alcohol to clean both sides
of the cutter blade.
The cutter blade is extremely sharp. Use
caution when cleaning.
7. After cleaning the blade, press
the blade to its home position.
You can also follow this procedure if the
cutter blade becomes lodged in the forward
position and will not move.
To clean the print head
Clean the print head using the cleaning tool
♦
located inside the label cassette compartment
lid. See Figure 11.
.
to return
Figure 11