- ページ 12

計測機器 BeneCheck BK3-12M-DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。BeneCheck BK3-12M-D 16 ページ。 Multi-monitoring meter

ページを印刷する

Chapter 5

Control Solution Test

Control solution is used to check the performance of the kit. The meter performs adequately

when control test falls within the range listed on test strip vial label.

The meter kit should be check:

• When the meter and strip do not work properly.

• When the test result is unusual or inconsistent.

Control solution range is shown as follow:

Please check your strip vial label for exact range.

control range level 0/ level 1/ level 2

G1303190

Test Strip

2017/01

98-164

mg/dL

5.4-9.1

mmol/L

Storage &

Operation

Transportation

90%

10%

EA13120901

2017-01

Storage &

Operation

Transportation

90%

10%

98-164

mg/dL

5.4-9.1

mmol/L

EA13120901

2017-01

Directions:

• Insert an unused strip

　into the meter.

• Shake well and discard

　the first three drops of

　control solution. And

　put one drop onto a

　clean surface.

• The result will display

　after countdown.

• Compare the result with

　the range listed on test

　strip vial.

New Taipei City 242

MDSS GmbH

Schiffgraben 41

30175 Hannover, G

FIG-80-SLG10-6BK

Control Range

level 0 / level 1 / level

98- 164

mg/dL

5.4-9.1

mmol/L

Storage &

Operation

Transportation

90%

10%

• Press "M" button for 3 seconds

　to enter the control solution

　mode.

• Touch the control solution with

　strip sample inlet .

Note:

• Do not reuse the test strip.

• Newly opened vial of control solution and test

　strips must be marked with the opening date.

• Close the strip vial lid completely after use.

• Do not use the meter if the control range do

　not fall in the correct range.

• If the control test keeps result wrongly,

　please contact an authorized distributor for

　help and service.

• Control solutions are not included. Please

　contact an authorized distributor for checking

　the meter kit performance.