- ページ 6

ラベルメーカー Dymo LabelWriter Twin Turbo H-1266のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dymo LabelWriter Twin Turbo H-1266 10 ページ。

4. Loading Labels

The LabelWriter Twin Turbo printer holds two label rolls, so you can print two

types of labels without having to change the label roll. For example, load address

labels on the left side and postage labels on the right side.

To load a label roll

Press the form-feed button to eject the labels that

protected the printer during shipment.

Open the top cover and remove any packing

material inside the label compartment.

Remove the label spool from inside the cover.

Hold the spool spindle in your left hand and place the

label roll on the spindle so that the labels feed from

underneath and the left edge of the label roll is flush

against the side of the spool. See Figure 8.

Place the spool guide onto the right side of the spool

and press the guide tightly against the side of the

label roll, leaving no gap between the roll and the spool. See Figure 8.

The label roll must fit snugly against both sides of the label

NOTE

spool, with no gaps, to avoid drifting as the labels feed through the

printer. See Figure 8.

Insert the label spool into the slot in the printer cover with the

labels extending from underneath the roll. See Figure 9.

PAGE 6 OF 10

H-1266

Spool

guide

spindle

Figure 7

Figure 8

Figure 9

0808 IH-1266