- ページ 4
エクステンダー 5BARz MD015A-1900のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。5BARz MD015A-1900 7 ページ。
There must be a signal in the area for 5BARz to boost. Areas where there is no signal
can not be helped with the 5BARz product.
The 5BARz Road Warrior includes a USB connect port on the side of the phone cradle
enabling you to power your phone while using the 5BARz. This cable comes standard
with most phones. Simply connect the cable to the phone cradle and your phone.
Contact your phone manufacturer if you need this cable.
For increased coverage area/range and more convenient product usage consider
purchasing an additional antenna. See
The LED light on the front of the unit changes colors to give you operation status
LED Color
Blinking blue
Solid blue
Solid yellow
Blinking red
Solid red
www.cellynx.com/products
Description
When unit is turned on it blinks
blue while self-configuring
Unit is ready and operating
This is a temperature warning
These are unit-protection
signals indicating one of the
following situations
the phone cradle and
5BARz unit are too close
together
5BARz unit is too close
to a cellular base station
5BARz is overheated
Possible internal failure
4
for more details.
Action
None
None
Turn off the unit and restart
in 10 minutes
Further separate the phone
cradle from the 5BARz unit
As you drive past the station
the blue light will reappear
Turn off the unit and restart
in 10 minutes
Turn the unit off and restart
in 10 minutes. If you get a
solid red signal again contact
support at
www.cellynx.com/support