- ページ 14

ラベルメーカー Dymo Rhino M1011のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dymo Rhino M1011 16 ページ。 Rhino

Hints for Trouble Free Operation

Keep the following in mind when using the label maker:

• Letters appear where you want spaces - You are probably squeezing

the embossing handle too hard.

• Letters overlap - The tape is slipping. This can happen when dirt or

grease gets on the rollers. Clean the rollers by using a soft cloth

and alcohol, while turning the tape advance knob back and forth

several times.

• Avoid turning the embossing wheel at the same time you are

squeezing the embossing handle. This can damage the

character wheel.

• When punching a cable tie slot, make sure the label is well inserted

and abutted against the end of the slot. If the label is not inserted to

the end, label jam may occur.

• It is recommended to remove regularly the label waste from the

waste exit at the bottom of the machine.