- ページ 9

プリンター Dymo LabelWriter 400 Duo GuideのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dymo LabelWriter 400 Duo Guide 13 ページ。 Desktop/pc connected labelmaker
Dymo LabelWriter 400 Duo Guide にも：セッティング (8 ページ), パンフレット (2 ページ), クイック・リファレンス・マニュアル (8 ページ), セットアップマニュアル (11 ページ), パンフレット＆スペック (2 ページ), コンテンツとインストール (4 ページ)

ページを印刷する

Mirrored text

You can also print mirrored text. You may for example want

to stick a transparent label on the inside of a glass door.

Press MIRROR (

highlighted, showing that the mirror function is enabled.

ALIGNING TEXT IN A LABEL

You can choose to align your text within a label. This func-

tion will add the blank part of the tape in different ways

your text

left aligned:

your text

centred:

your text

right-aligned:

MULTIPLE LINES

Press

to start the next line of text on a multi-line label.

This is a two

line label on the display will be printed as:

This is a two

line label

and the display will indicate two lines:

You can print up to five lines on one label.

Tape width

Maximum number

24mm

19mm

12mm

9mm

6mm

JUSTIFYING TEXT IN MULTI-LINE LABELS

For multi-line labels, you can choose three options for your

text alignment: left-justified, centre-justified, or right-justi-

fied. Press JUST (

between these three options, which are shown on the left of

the display.

+ graphics of annunciators

left justified

centred

right justified

). The cba indicator will be

Font

Alignment indicator

[=]

of lines

)repeatedly to toggle

Style

STAIRCASE

emergency lighting

BX-243

STAIRCASE

emergency lighting

BX-243

STAIRCASE

emergency lighting

BX-243

WORKING WITH TABS

Adding tabs to a label

You can add tabs within a label if you want to line up your

text over different lines. To enter a tab, press TAB. The

default length is 50mm. Tabs are only left-aligned.

text

SETTING A FIXED LENGTH FOR YOUR LABELS

Normally the length of your label depends on the length of

your text. You may wish to print a series of labels of the

same length - perhaps to label files or folders. The FIXED

LENGTH function allows you to set a fixed length for the

label. To set a fixed length, press length (

The fixed length indicator will be highlighted.

The last fixed length used by the printer will appear on the

display, for example:

040mm

You can change this setting in two ways.

• Either use the P or H keys to increase or decrease the

setting in steps of 1mm.

• Or key in the number using the number keys, starting

from the right-hand digit. Use Q to move one digit to

the left. Press

Note if your fixed length is shorter than the text of your

label, an error message will flash.

To return to the automatic length mode, press

and the machine will return to the automatic length setting.

The fixed length indicator will no longer be highlighted.

PRODUCING A BAR CODE

The LabelMANAGER 400 can generate bar codes in the six

standard barcode formats: EAN-13, EAN-8, UPC-A, UPC-E,

CODE-39 and CODE-128.

Barcodes can be printed on 19 and 24mm wide labels only

and can be either full height or mixed with one line of text.

To create a bar code:

• Press

to display the barcode type previously

Bcode

selected.

• Press

to return to the current label, or

Cancel

• Use P or H to step through the barcode types available:

EAN-13, EAN-8, UPC-A, UPC-E, CODE-39 and CODE-128.

• Press

to select the barcode type displayed. The bar-

code indicator will light in the display and the symbols

and

will appear at each end of the space allocat-

ed for barcode characters.

• Enter the characters which will become the barcode,

e.g.: 1234567.

• Press

to return to the label.

text

to confirm.

Cancel

again,

Lenght