- ページ 8

バッテリーチャージャー Gacell CT-15000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gacell CT-15000 13 ページ。

(1) JUMP CHARGE, but larger vehicles with dual battery systems, may

require an additional JUMP CHARGE. Do not use jump charge more than

two (2) times within a 24-hour period. If two (2) jump charges cannot

successfully start your vehicle, have your battery replaced or evaluated

by a local battery store.

CHARGING STEPS

STEP 1: DIAGNOSIS (Check if battery has connected with the charger

and also check battery voltage)

STEP 2: DESULPHATION (If battery voltage is too low, programs

automatically generate pulsing current to remove sulphate, up to 5

hours)

STEP 3: ANALYSE (Check if the battery voltage reaches to the threshold

after desulphation, and charging begins if the battery voltage is OK)

STEP 4: SOFT START (Charge with echelon constant current)

STEP 5: BULK (Charge with constant maximum current until battery

voltage is reached to the threshold)

STEP 6: ABSORPTION (Provide gradually declining current charge for

maximum battery voltage)

STEP 7: ANALYSE (Test if the battery can hold charge)

STEP 8: MAINTENANCE (Continuously monitor the battery, and charging

current will intelligently adapt to the variable battery voltage)