- ページ 2

ソフトウェア Dymo LabelWriter 400 Duo GuideのPDF セッティングをオンラインで閲覧またはダウンロードできます。Dymo LabelWriter 400 Duo Guide 8 ページ。 Desktop/pc connected labelmaker
Dymo LabelWriter 400 Duo Guide にも：取扱説明書 (13 ページ), パンフレット (2 ページ), クイック・リファレンス・マニュアル (8 ページ), セットアップマニュアル (11 ページ), パンフレット＆スペック (2 ページ), コンテンツとインストール (4 ページ)

Setting Up the DYMO LabelWriter 400 Printer with Terminal

Setting Up the DYMO LabelWriter 400 Printer with Terminal Services

Notes

• Depending on the policies of your network, local serial port mapping

might be disabled for some or all remote connections.

• You might see a security warning message asking if you want to

connect your local disk drives, local ports, or smart card to the remote

computer. To enable one or more of these connections, select the

appropriate check boxes. If you choose not to enable these

connections, a remote connection is still established, but these

resources are not available to the remote computer.

• The following instructions require that you have Microsoft Remote

Desktop Connection 6 (or later) installed on the local computer.

Information about Remote Desktop Connection can be found on

Microsoft's Web site at

http://support.microsoft.com/default.aspx/kb/925876.

• OfficeMate Software Solutions does not support the use of any other

DYMO label printer, including any of the desktop or handheld label

printers. Information about the DYMO LabelWriter 400 can be

found on the DYMO Web site at

http://global.dymo.com/enUS/Products/LabelWriter_400.html.

• OfficeMate Software Solutions does not support the use of the

DYMO LabelWriter 400 printer beyond the information covered in

this document. Refer to the DYMO Web site at at

http://global.dymo.com/enUS/TechSupport/

information.

To install the DYMO Label Software on the terminal server

Install the DYMO LabelWriter software from the CD that came with your

printer.

Note

If you do not have the DYMO LabelWriter CD, download the

printer drivers and software application from the DYMO Web site

at http://global.dymo.com/enUS/TechSupport/.

When the DYMO Label Software installation launches, the License Agreement

window opens.

Select the I Accept radio button and click Next.

Click Next to bypass the welcome message.

Click Browse, select where to install the DYMO Label Software, and click Next.

Click Next to bypass the installation message.

for more