- ページ 5

ソフトウェア Dymo LabelWriter 400 TurboのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dymo LabelWriter 400 Turbo 8 ページ。 Dymo labelwriter quick start guide
Dymo LabelWriter 400 Turbo にも：クイック・スタート・マニュアル (14 ページ), パンフレット (2 ページ), クイック・リファレンス・マニュアル (8 ページ), クイック・スタート・マニュアル (10 ページ)

3. Connecting your LabelWriter Printer

At some point during the software installation, you will be asked to connect your

LabelWriter printer to the USB port.

For Windows, do not connect the printer to

NOTE

your computer until instructed to do so during the

software installation.

To connect the power

1 Plug the power cord into the power adapter. See

Figure 4.

2 Plug the power adapter into the power connector

on the bottom of the printer. See Figure 5. Make

sure to push the plug in completely.

3 Plug the other end of the power cord into a

power outlet.

To connect the USB cable

1 Plug the USB cable into the USB port on the

bottom of the printer. See Figure 5.

2 Insert the power and USB cables into the cable

channel and set the printer down on your work

surface.

3 When prompted during the software installation and

while the printer is turned on, plug the USB cable into

an available USB port on your computer. See Figure 6.

Power cord

Cable

channel

Power adapter

Figure 4

USB

Figure 5

Figure 6

Power