ページを印刷するMonitor
Press the assigned Soft key momentarily to override (disable) the
Tone squelch.
Background noise or incoming signals will now be heard whether or
not a matching tone is present on the signal).
Press and hold in the assigned Soft key for more than 1 seconds to
override both the Noise and Tone squelch. Again press and hold in
the assigned Soft key for more than 1 seconds (or press the assigned
Soft key twice) to resume normal (quiet) Noise and Tone squelch
action.
Low Power
Press the assigned Soft key to set the radio's transmitter to the "Low
Power" mode, thus extending battery life. Press the assigned Soft
key again to return to "High Power" operation when in difficult ter-
rain.
Lock
Press the assigned Soft key to lock the Soft keys (except Lock and
Monitor key); thus, the [A], [B], [C], and MONITOR keys can be
disabled to prevent radio settings from being disturbed.
Lamp
Press the assigned Soft key to illuminate the LCD for five seconds.
Channel Up
Press the assigned Soft key to switch to a higher operating channel
number.
Channel Down
Press the assigned Soft key to switch to a lower operating channel
number.
Scan
The Scanning feature is used to monitor multiple channels pro-
grammed into the transceiver. While scanning, the radio will check
each channel for the presence of a signal, and will stop on a channel
if a signal is present.
r To activate scanning:
Press the assigned Soft key.
The scanner will search the channels, looking for active ones; it
will pause each time it finds a channel on which someone is speak-
ing.
r To stop scanning:
Press the assigned Soft key.
Operation will revert to the channel to which the CH knob is set.
Follow-Me Scan
"Follow-Me" Scan feature checks a User-assigned Priority Channel
regularly as you scan the other channels. Thus, if only Channels 1, 3,
and 5 (of the 8 available channels) are designated for "Scanning,"
the user may nonetheless assign Channel as the "User-assigned" Pri-
ority Channel via the "Follow-Me" feature.
Press the assigned Soft key to activate "Follow-Me" scanning, then
turn the CH selector knob to the channel which you want to desig-
nate as the "User-Assigned Priority Channel". When the scanner stops
on an "active" channel, the User-assigned Priority Channel will au-
tomatically be checked every few seconds.
Description of Operating Functions
BENELEC PTY. LTD ACN# 064708390
Telephone
:
Fax
:
Email
:
Web Site:
www.benelec.com.au
Dual Watch
The Dual Watch feature is similar to the Scan feature, except that
only two channels are monitored: the current operating channel, and
the "Priority" channel.
r To activate Dual Watch:
Press the assigned Soft key.
The scanner will search the two channels; it will pause each time
it finds a channel on which someone is speaking.
r To stop Dual Watch:
Press the assigned Soft key.
Operation will revert to the channel to which the CH knob is set.
Talk Around
Press the assigned Soft to activate the Talk Around feature when
you are operating on duplex channel systems (separate receive and
transmit frequencies, utilizing a "repeater" station). The Talk Around
feature allows you to bypass the repeater station and talk directly to
a station that is nearby. This feature has no effect when you are oper-
ating on "Simplex" channels, where the receive and transmit fre-
quencies are already the same.
Note that your dealer may have made provision for "Talk Around"
channels by programming "repeater" and "Talk Around" frequen-
cies on two adjacent channels. If so, the key may be used for one of
the other Pre-Programmed Functions.
Add/Del
The Add/Del feature allows the user to arrange a custom Scan.
Press the assigned Soft key to delete/restore the current channel to/
from your scanning list.
When you delete a current channel, "SKIP" will appear on the LCD
after pressing the Soft key. When you restore a current channel,
"SKIP" indicator on the LCD will turn off.
Call/Reset
When the 2-tone selective calling unit is installed, press the assigned
Soft key to silence the receiver and reset for another call, when a
communication is finished.
Speed Dial
Your Dealer may have pre-programmed Auto-Dial telephone num-
ber memories into your radio.
To dial a number, just press the Dealer-assigned Soft key for Speed
Dialing. The DTMF tones sent during the dialing sequence will be
heard in the speaker.
TX Save Off
Press the assigned Soft key to disable the Transmit Battery Saver, if
you are operating in a location where high power is almost always
needed.
The Transmit Battery Saver helps extend battery life by reducing
transmit power when a very strong signal from an apparently nearby
station is being received. Under some circumstances, though, your
hand-held radio may not be heard well at the other end of the com-
munication path, and high power may be necessary at all times.
61-2-9364 7000
61-2-9364 7099