スピーカー Gadgetree 8047866のPDF 操作説明をオンラインで閲覧またはダウンロードできます。Gadgetree 8047866 4 ページ。 Pulse bluetooth speaker
Gadgetree 8047866 にも：操作説明 (2 ページ)

ページを印刷する

PULSE BLUETOOTH

Operating Instructions

Thank you for choosing the Gadgetree Pulse Bluetooth

device wirelessly with Bluetooth

WHAT'S IN THE BOX

• Speaker

• USB charging + AUX 2-in-1 cable

PRODUCT FEATURES

VOLUME UP (short push)/

NEXT SONG (long push)

VOLUME DOWN (short push)/

PREVIOUS SONG (long push)

PLAy/PAUSE/ANSWER & END cALL

OPERATION

1. Press the ON/OFF button located on the top of the speaker. When active, the speaker's audio will prompt "The Bluetooth

2. Using your Bluetooth

-enabled smart device, find "Gadget 8047866" from the pairing list. (Tip: Ensure the Bluetooth

3. Upon successful connection, the speaker's audio will emit two short ascending beeps. The speaker will reconnect automatically if your smart device

has been paired previously. When disconnecting, the speaker will emit two short descending beeps.

4. See speaker illustration for general function guidelines.

connect to any

USB port to charge

or play music

HANDSFREE CALLING

1. To answer an incoming call, press the PLAy/PAUSE button.

2. To end or reject an incoming call, press and hold the PLAy/PAUSE button.

3. Double-press the PLAy/PAUSE button to redial the last number called on your mobile device.

AUDIO INPUT (AUX-IN MODE)

In addition to Bluetooth

, this speaker can play music using the 3.5mm audio cable included in the box.

1. Using the 3.5mm audio cable, connect the speaker to a smart device with 3.5mm audio port.

2. Press and hold the

button to enter AUX mode. The speaker will emit one short beep when connected.

3. When in AUX-IN mode, all speaker functions such as PLAy, PAUSE and TRAcK SELEcTION will have to be operated from the smart device.

Tip: If there is no sound during AUX-IN mode, check to ensure the speaker is not already paired via Bluetooth

CHARGING THIS DEVICE

1. The speaker will emit 3 descending beeps when battery is low.

2. Using the 2-in-1 cable included in the box, connect the speaker to a USB charging port.

3. The charging indicator will turn red when charging and then turn off when the speaker is fully charged. Approximate charging time is 2-3 hours.

It is recommended to disconnect the charging cable after charging is complete. Do not leave the charging cable inserted when the speaker is not in use.

PRODUCT SPECIFICATIONS

• Bluetooth

connection range: 10 metres

• charging time: Approximately 2-3 hours

• Battery: built-in 800mAH Li-battery

• charging input: 3.7V 1A

SPEAKER

Speaker. Play music from any mobile

and watch the LED lights pulsate to the beat of your music.

Plug into 3.5mm devices

device is ready to pair".

is enabled on your device.)

8047866