- ページ 7

超音波ジュエリークリーナー HHO Plus ECC320のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HHO Plus ECC320 13 ページ。

4. Working with the machine

Please follow these simple steps for the general use of the Engine Carbon Cleaner:

1. Open the air filter box, remove filter element and clean the area inside in order to avoid dust particles from

entering the engine;

2. Insert the hose of the machine in the air intake manifold inside the air filter box;

3. Turn engine ON and let it work for some time until it reaches normal working temperature (80-90º);

4. At this point turn the machine ON;

5. Press the first red power control switch and check the amperage in the ammeter;

6. Let the engine work idling for the first 20 minutes with only one button working;

7. Every 10 minutes press hard acceleration pedal in order to improve removal of the carbon deposits;

8. After the first 20 minutes of treatment increase the rotations of your engine to 1000 rpm and turn ON

second and third power control Swicth. Check again amperage in the ammeter.

9. Keep the machine working for one (1) hour to complete engine cleaning;

10. Every 10 minutes accelerate the engine in order to remove faster carbon deposits.

11. Repeat this operation every 10 000 km.

The system is operated by vacuum suction from your engine's air intake which takes the HHO directly to the

combustion chamber mixing it with the air/fuel. The injection point must be done right after the air filter box

and the MAF/MAP sensor enhancer. Please follow the next steps:

1. Open the air filter box and remove the air filter;

2. In the air filter box please cover the engine air intake

with a cloth to prevent dust particles from entering the

engine;

3. With an air compressor clean the air filter area so that

it stays completely free from dust particles;

4. Remove the cloth and insert the hose in the air intake

manifold.

HHO Plus, Alternative Energies, Lta – Travessa das Serras 33, Vieira de Leiria, Portugal – Tel. 00351244697116 – Email: [email protected]

ECC320 – User Manual