- ページ 4

医療機器 DAW Industries EZ-Access DAWSKINのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DAW Industries EZ-Access DAWSKIN 8 ページ。

USING A SHUTTLE LOCK?

Preserve the DAWSKIN's appearance by adjusting the shuttle

lock button length & prepping it's hole in the foam cover.

1. Adjust or build-up the length of the shuttle lock button so it rests flush with the

outer surface of the foam cover. With the proper length, your patient can press the

button with the "pad" of their finger, rather than their fingertip, which after repeated

pushes, may cause their fingernail to wear holes in their DAWSKIN.

2. Protect the inside surface of the

DAWSKIN from sharp edges of the

shuttle lock button. Using a scrap

piece of DAWSKIN, make a circular

patch large enough to cover the hole

in the foam cover made for the lock

release button. Glue the patch to the

foam cover with S-Glue.

3. DAW Recommends your patient be trained to press their shuttle lock button

with their finger "pad", not their finger tip, because it may wear holes in their

DAWSKIN allowing liquid to soak into their foam cover.

USING AN EXPULSION VALVE? SEE STEP

Preserve The DAWSKIN's Appearance By Using

A Color-Matched Valve Patch (DSK-VP).

DAW

Industries

Technical Support (800) 242-8669

Foam Cover

Shuttle Lock

Button

Foam Cover

DAWSKIN Color-Matched

Valve Patch (DSK-VP).

S-Glue

Circular

Build

DAWSKIN

Patch

S-Glue

www.daw-usa.com

•

Pg. 3