- ページ 4

ツール Gage Bilt GB574AのPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。Gage Bilt GB574A 16 ページ。 Installation tool

WARNING:

Any other use is forbidden.

The GB574 and the GB574(A) are hydraulic installation tools designed specifically for the efficient installation of HUCKRIMP® (krimpnuts)

with a crimping action that deforms the nut to provide accurate installation loads. They weigh just over 3 lbs. (1.36kg) and can be operated

in any position. They have up to a .300" (7.6 mm) fastener setting stroke and a rated pull load of 12,428 lbs. (55.3 kN).

The GB574 installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL

pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and a electric control cord assembly.

The GB574(A) installation tool operates on hydraulic pressure developed by a Powerunit set at 6,000 psi. (414.0 bar) maximum PULL

pressure. The tool comes equipped with a 12 feet (3.65 m) of hydraulic hose with quick disconnects and an air line assembly.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection

chart on pg. 14).

WARNING:

Do not operate in an explosive atmosphere.

The GB574 & GB574(A) can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB574/GB574A Installation Tool

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. Pressure Req'd.

Hyd. Power Source

Hydraulic Oil

Setting Stroke

Rated Pull Load

- 3 lbs. (1.36 kg)

- 6,000 psi (414.0 bar) MAX. PULL (Tool spring RETURN)

- GB910, GB912 or GB940

Powerunit or equivalent.

- See hydraulic pump instructions.

See powerunit for hydraulic oil specifications.

- up to .300" (7.6 mm)

- 12,428 lbs. (55.3 kN)

Rev. 6/22