- ページ 4

電動工具 Gage Bilt GB703SRVT/6N10EのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB703SRVT/6N10E 14 ページ。 Installation tool

PRINCIPLE OF OPERATION

When the lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure

to move the valve spool assy causing the air to be redirected. The air is directed to the top of the air piston

assy, moving it in a downward direction. The air below the air piston assy is then directed through the valve

sleeve and exhausted out of the bottom of the tool. Simultaneously, the piston rod assy connected to the air

piston assy is also moving down, forcing hydraulic oil up and into the front side of the head cylinder, causing

the piston to move to the rear of the head cylinder. The internal components of the attached nose assembly

are also moving with the piston to start the fastener installation. When the fastener installation is completed,

the lever assy is released. Air pressure is then built up inside of the handle assy causing the valve spool assy

to return to its original position and reversing the sequence directing air pressure to the rear of the head

cylinder, causing the piston to move to the forward position.

Image may not reflect actual tool

8/14