- ページ 7

電動工具 Gage Bilt GB713のPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。Gage Bilt GB713 20 ページ。
Gage Bilt GB713 にも：インストレーション・マニュアル (14 ページ), オリジナル取扱説明書 (18 ページ)

When the air actuator assembly is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the

valve spool assembly causing the air to be redirected. The air is directed to the top of the air piston assembly, moving it in a downward

direction. The air below the air piston assembly is then directed through the valve sleeve and exhausted out of the bottom of the tool.

Simultaneously, the piston rod assembly, connected to the air piston assembly, is also moving down, forcing hydraulic oil up and into

the front side of the head cylinder assembly, causing the piston to move to the rear of the head cylinder assembly. The internal

components of the attached nose assembly are also moving with the piston to start the fastener installation. When the fastener

installation is completed, the air actuator assembly is released. Air pressure is then built up inside of the handle assembly causing

the valve spool assembly to return to its original position and reversing the sequence directing air pressure to the rear of the head

cylinder assembly, causing the piston to move to the forward position.

Air exhaust

Piston Rod Assembly

moves down

Air Piston

moves down

GB713 Installation Tool

PRINCIPLE OF OPERATION

PULL Cycle

Air exhaust

Pressurized Oil

Unpressurized Oil

Images may not reflect actual tool.

Piston Rod Assembly

moves up

Air Piston

moves up

Pressurized Air

Unpressurized Air

RETURN Cycle

Air exhaust

7/11 REV 5/22