- ページ 6

電動工具 Gage Bilt GB715のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB715 17 ページ。
Gage Bilt GB715 にも：オリジナル取扱説明書 (20 ページ)

When the actuator lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the

valve spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward

direction. The air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool.

Simultaneously, the piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the front

side of the head cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the

attached nose assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed,

the actuator lever assy is released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return to its

original position and reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston to move to

the forward position.

Piston Travel

Actuator

Depressed

GB715 S/N: 1242 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

PRINCIPLE OF OPERATION

Piston Rod Assy

moves down

Air Piston

moves down

PULL Cycle

Air exhaust

Exhaust Air

Image may not reflect actual tool

Pressurized Oil

Return Oil

Pressurized Air

Piston Travel

Piston Rod Assy

moves up

Air Piston

moves up

RETURN Cycle

Exhaust Air

Air exhaust

REV. 2/16