- ページ 7

電動工具 Gage Bilt GB7624のPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。Gage Bilt GB7624 20 ページ。 Hydraulic tool
Gage Bilt GB7624 にも：インストール (9 ページ)

When the tool is connected to a powerunit, operation is controlled by the electric actuator. When the button is depressed, a directional

valve in the powerunit directs oil to the front side of the piston forcing it and the nose assembly collet rearward. This action causes

the jaws to clamp onto the fastener pintail and pull the sheets together. The anvil is forced forward, swaging the collar into locking

grooves of the fastener. Further force breaks the pintail off, approximately flush with the collar.

When the button is released the directional valve reverses oil flow to the back of the piston and pushes the nose assembly off the

swagged fastener. The pintail ejector hydraulically pushes the spent pintail out of the nose assembly.

Note: GB7624 Nose assembly attachment video located on our website at : http://www.gagebilt.com/

rivet_tools_videos.php may be viewed to review this procedure.

Pintail

Piston Travel

Ejector

Actuator

PULL Cycle

GB7624 S/N: 1140 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

PRINCIPLE OF OPERATION

HYDRAULIC DIAGRAM

PULL Pressure

RETURN Pressure

located behind / in line with

pull pressure

Pressurized Oil

Unpressurized Oil

Image may not reflect actual tool

Piston Travel

Actuator

RETURN Cycle

Rev. 4/22