ページを印刷するCamera installation
1.
Camera detection will need 30 second's to stable in the first time plug in
power. At this time, please make sure no people and heat are around the
detected areas of camera range. It can to avoid wrong detection.
2.
The detection mode will be the Monitoring mode for factory default.
3.
After use remote controller set up mode type, camera will auto
memorized the setting even if the power failure reopen.
4.
The white light blink times depends on detect mode after power on.
5.
When set up to motion detect mode, obvious and fast change of light will
switch on the white light, the equal result of detected actual motion.
Therefore, base on the actual environment to proper set up camera to
have best result will be suggested.
6.
Remote controller is optional.
Optional
DIMENSION
9
11
SPECIFICATION
1/3" COLOR CCD SENSOR INTERLINE
IMAGE SENSOR
NTSC:537(H) x 505(V)
Effective Pixels
PAL:537(H) x 597(V)
NTSC:510(H) x 492(V)
Effective Pixels
PAL:500(H) x 582(V)
2：1 Internal
Synchronizing system
NTSC 525 lines/ 60 fields
Scanning system
PAL 625 lines / 50 fields
1.0 Vp-p / 75 ohms
Video Output
Electronic Shutter
(1/60~1/100000 sec) NTSC, (1/50~1/100000 sec) PAL
Board Lens 6.0mm,
Lens
420 TV Lines
Horizontal Resolution
More than 48dB (AGC OFF)
S/N Ration
0.05 lux color
Minimum Illumination
2400°K~9400°K
Auto White Balance
IP65
Weatherproof
15M(12pcs IR LED)
IR Distance
13LUX / 15LUX IR ON / OFF
IR Trigger
<10M
White light Distance
8LUX
White light trigger
3M
Motion detect range
Light Change / picture change
Motion detect
7M
PIR detect range
temperature
PIR detect
P-T-T (Pan-Tilt Twist)
X-Y-Z Position
±10﹪DC12V / 1A
Power Supply
3.１２W (Max)
Power Consumption
260mA (Max)
Current
N.W./G.W.:0.66kg / 0.815kg
Weight
120mm x 99.1mm
Dimension
-10 to 50
℃
Operating Temp
-12 to 70℃ (-4 to 158 )
Storage Temp
10
composite
Auto Electronic Shutter
(14 to 122 )
℉
℉
85-CW8301-A002G -B