- ページ 3
デジタルカメラ Active Silicon AS-CAM-18HDMI4K-AのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Active Silicon AS-CAM-18HDMI4K-A 9 ページ。
Harrier 18x HDMI 4K Camera Evaluation Board Overview
Figure 4. Harrier 18x HDMI 4K Camera Evaluation Board diagram
The Harrier 18x HDMI 4K Camera Evaluation Board connects to the camera using the supplied FFC
and KEL cables. It connects to a host PC using the mini-USB cable.
The board is powered by the 12V power supply via a barrel connector (J1). This supply is also used
as a power supply for the camera and is connected to the camera via the Power Switch (SW1).
When the Power Switch (and camera power supply) is switched ON the Power (LED1) will illuminate.
When the Harrier 18x HDMI 4K Camera Evaluation Board is connected to a PC using the mini-USB
cable, the Windows 10 operating system will see a virtual COM port; this port is automatically
assigned a number by Windows. To identify the COM port number that Windows 10 has assigned to
the camera, open Device Manager and look at the COM & LPT ports. You can identify the right COM
port number by comparing reported port numbers with the USB connection to the board
connected/disconnected.
September 2021
HARRIER 18x AF-ZOOM HMDI 4K CAMERA
QUICK START GUIDE
Version 1.0.0 - September 2021
Page 3 of 9