![5th Wheel G1 ユーザーマニュアル](/uploads/products/server2/18643/18643.jpg)
4 Scooter Assembly
1.Unfold the folding mechanism of G1 and put down the
kickstand.
Unfold G1 and fix the folding mechanism.
(Refer to "Folding and Carrying"
for retails of unfolding.)
3.Use the tools included in the package to tighten the screws.
12
2.Insert the handlebar into the scooter bar.
Pull out the cables placed
in the scooter bar and the
handlebar.
4.After assembly, check whether the power switch can work
normally.
After assembly, check
whether the power
switch can work normally.
5 Unfolding/Folding/Carrying
1. Unfolding Operations
1.Pull the cylindrical folding switch outward (to the right side).
3.When pulling the scooter bar to the correct place, push the
folding switch down to the bottom to fix it.
2.When pulling the folding switch, pull up the scooter bar.
4.Rotate the folding switch to the OFF position and G1 is
now unfolded completely.
13