- ページ 5
室内装飾品 Dawn UN7805-01のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dawn UN7805-01 6 ページ。 Vanity top mount
ページを印刷するDawn® Vanity Cabinets
Wood naturally darkens over time or changes slightly in color due to light exposure and may go unnoticed from day to day. However,
over an extended period of time it may become more noticeable, depending on the amount of sunlight exposure. Our warranty
replacement products are not guaranteed to have an exact match. Any imperfections such as small surface splits, small dark pits or
dark mineral streaks are natural and will not be considered as defects.
•
Do regular routine cleaning rather than an occasional aggressive single cleaning.
•
Dust frequently with a soft cloth and occasionally use a wood cleaner that is not silicone based.
•
Do not place in direct sunlight or near windows with direct sunlight exposure.
•
Avoid extreme temperature changes and keep away from heater and air conditioning units.
•
Do not allow liquids to remain on the wood surfaces for longer than necessary.
•
Liquid absorption will cause wood to warp, bubble, and crack, and your finish may peel.
Dawn® Glass Sinks
Dawn® glass sinks are manufactured to our highest possible standards and regulations to ensure you receive the utmost quality.
Dawn® tempered glass sinks are made to last because the tempering process makes them stronger than annealed glass. That does
not mean they are indestructible, but rather more durable and practical for everyday use. We have a few recommendations to make
your sink last and maintain its sheen. Glass is subject to thermal stress when it experiences extreme hot or cold conditions suddenly.
Glass needs time to be heated or cooled to extreme temperatures, and sudden changes can cause stress cracks to the product.
•
Clean regularly with hot water and a mild detergent solution applied with a soft cloth or sponge to remove deposits.
•
Rinse thoroughly and towel dry after every use to prevent water spots and mineral deposits.
•
Drying your sink afterwards will help prevent water spots.
•
Rain-X®, which is available at most automotive departments can be applied to keep your Dawn® sink water spot free.
Dawn® Ceramic Sinks
To keep your Dawn® products the center of attention, we suggest you follow these guidelines to maintain its quality and beautiful
aesthetics. Deep clean once a week with an approved cleanser and a soft cloth or sponge rather than an occasional aggressive single
cleaning.
Water quality can also affect your Dawn® sink making it appear dull or stained. Lime scale is notorious for absorbing liquids like
coffee, tea, and wine making the stained or tinged look. To remove lime scale build up on your Dawn ® sink, use a lime scale cleaning
agent, such as CLR®. You can also soak the sink in 1 part white vinegar and 3 parts water to help loosen problematic areas making it
much easier to sponge away debris. Make sure to use a non-abrasive pad/sponge with a ceramic cleaner.
Do's and Don'ts
•
Clean regularly with hot water and a mild detergent solution applied with a soft cloth or sponge to remove deposits.
•
Rinse thoroughly and towel dry after every use to prevent water spots and mineral deposits.
•
Drying your sink after each use will help prevent water spots and lime scale.
•
To remove lime scale or water spots, only use cleaners made specifically for that purpose. Apply cleaners to cleaning cloths,
pads, or sponges first, and test in a small area; do not apply directly onto the product.
•
Do not allow any cleaning product to remain on your sink longer than necessary.
•
Do not leave rubber patches, wet sponges, cloths, cleaning pads, or dishpans in the sink.
•
Do not use coarse abrasive powders and metallic scourers, such as steel wool or brushes with metal bristles.
•
Do not allow liquid soap or other cleansers to dry on the surface of the sink.
•
Do not use detergents or soaps that contain acid or that are not dissolvable.
CARE AND CLEANING
5